Instructions

Dx350_05a_oi_e.doc / Mai-18 Seite 6 / 51
2 Introduction
This series of display unit is suitable for HTL impulse signals and panel mounting. It is very versatile in
use, due to the intuitive handling and the extensive range of functions and options.
2.1 Operation mode
All functions are can be configured in the parameter menu.
The device can be set to one of the following operation modes:
• SPEED (only Input A or Input B are used, depending on the parameter setting)
- Tachometers / speed indicator
- Measurement of frequency / RMP indicator
- Monitoring functions for speed and standstill
• PROCESS TIME (only input A is used)
- Processing time indicator (reciprocal speed)
- Baking time indicator
- Flow time indicator
• TIMER (only Input A or Input B are used, depending on the parameter setting)
- Operation as stopwatch (start- / stop function can be freely parameterized)
- Counter for operation hours
- Period measurement
• COUNTER (input A and input B are used)
- Pulse counter / sum or differential counter
- Up- or down counter
- Position indicator
- Quadrature counter
- Batch counter
• VELOCITY (Input A operates as a start input and input B operates as a stop input)
- Runtime measurement as speed indicator.
2.2 Function diagram