Datasheet

motrona GmbH, Zwischen den Wegen 32, 78239 Rielasingen (Germany), Tel. [phone], Fax [phone], [e-mail], www.motrona.com
Ix345-346-347-348_01a_ds_e.doc
Technical Specifications:
Power supply:
Input voltage (AC):
Power consumption (AC):
Input voltage (DC):
Protection circuit (DC):
Ripple (DC):
Consumption (DC):
Connections:
115 / 230 VAC (+/- 12.5 %)
7.5 VA
24 VDC (17 … 30 VDC)
reverse polarity protection
≤ 10 % at 24 VDC
approx.. 150 mA (unloaded)
AC: screw terminal, 2.5 mm² / AWG 12
DC: screw terminal, 1.5 mm² / AWG 14
Encoder supply:
Output voltage:
Output current:
24 VDC +/- 15 % (with AC supply)
max. 150 mA
SSI interface:
Modes:
Format:
Frequency range:
Resolution:
Accuracy:
Connections:
Master or Slave operation (selectable)
Binary or Gray code (selectable)
100 Hz … 1 MHz
8… 32 Bit (unused bits can be blanked)
+/- 1 digit
screw terminal, 1.5 mm² / AWG 14
Control inputs:
Number of inputs:
Input logic:
Signal level:
Functions:
Pulse time:
Internal resistance:
Connections:
3
PNP/NPN/Namur
HTL (standard): LOW 0 … 2 V, HIGH 9 … 35 V
A = send serial (only IX348), B = no function, C = set/reset
min. 5 ms
Ri ≈ 4.7 kOhm
screw terminal, 1.5 mm² / AWG 14
Analog output (IX346):
Volt output:
Current output:
Resolution:
Accuracy:
Reaction time:
-10 … +10 V / 0 … 10 V (max. 2 mA)
0 … 20 mA / 4 … 20 mA (burden: max. 270 Ohm)
14 Bit (±13 Bit)
0.1 %
depends on selected operation mode
Transistor outputs (IX347):
Number of outputs:
Output logic:
Signal level:
Reaction time:
Output current:
Connections:
2
PNP
5 … max. 35 V (depends on voltage at COM+)
approx. 5 ms
max. 150 mA
screw terminal, 1.5 mm² / AWG 14
Serial interface (IX348):
Format:
Baud rates (selectable):
Operation modes:
Connections:
RS232, switchable to RS485 (2-conductors)
600, 1200, 2400, 4800, 9600, 19200, 38400 Baud
PC or printer mode
screw terminal, 1.5 mm² / AWG 14
Display:
Type:
Characteristic:
6 Digit LED display
high-efficiency orange, 15 mm / 0.59’’
Housing:
Type:
Material:
Mounting:
Dimensions (w x h):
Protection class:
Weight:
Norly UL94 – V-0
plastic
panel
cut out: 91 x 44 mm / 3.583 x 1.7323 inch
outer dimensions: 110 x 48 x 140 mm / 4.331 x 1.889 x 5.511 inch
front: IP 65 / rear: IP20
approx. 450 g
Ambient temperature:
Operation:
Storage:
0 °C … +45 °C / +32 … +113 °F (not condensing)
-25 °C … +70 °C / -13 … +158 °F (not condensing)
Failure rate:
MTBF in years
(long-term usage at 60 °C / 140 °F ):
IX345: 75.0 a
IX346: 64.3 a
IX347: 74.9 a
IX348: 70.3 a
Conformity and standards:
EMC 2004/108/EC:
LV 2006/95/EC:
RoHS 2011/65/EU:
EN 61000-6-2, EN 61000-6-3, EN 61000-6-4
EN 61010-1
EN 50581