User manual

IX34510b_e.doc / Mrz-13 Page 22 / 43
4.5. Additional Parameters for Units with Serial Interface
(model IX 348)
The following additional settings for serial communications appear in the Basic Menu:
Menu
Setting Range
Default
Unit Number
You can assign any unit number between
11 and 99. The address must however not contain a
“0“ because such numbers are reserved for collective
addressing of several units.
0..99 11
Serial Data Format
The first character indicates the number of data bits.
The second character specifies the Parity Bit
„Even“, "Odd“ or no Parity Bit.
The third character indicates the number of Stop Bits.
Baud Rate
The following Baud Rates can be set for
communication: