Datasheet

Uz210_02c_oi_e.doc / Dez-15 Page 10 / 27
4. Connections and Control Elements
For electrical connection the unit provides four plug-in terminal strips X1, X3, X4 and X5, with
mechanical codification against accidental misconnection. The 9-position Sub-D-connector X2
and the front USB port provide communication and PC setup of the unit.
4.1. Power Supply
The UZ 210 converter requires a DC supply from 12 to 30 VDC applied to the screw terminals
X1 [1] (+) and X1 [2] (-) (residual ripple ≤ 0,5 V). In idle state the typical consumption is approx.
50 mA (24 VDC input). The green front LED indicates that power is applied to the unit.