Datasheet
Uz210_02c_oi_e.doc / Dez-15 Page 26 / 27
8. Technical Specifications
Power supply:
Input voltage:
Protection circuit:
Ripple:
Consumption:
Connections:
12 … 30 VDC
reverse polarity protection
≤ 10 % at 24 VDC
approx. 50 mA (unloaded)
screw terminal, 1.5 mm² / AWG 14
Analog input:
Voltage input:
Internal resistance:
Current input:
Internal resistance:
Resolution:
Accuracy:
Update-time:
max. Input frequency:
VREF for external
potentiometer:
Internal VREF resistance:
Connections:
-10 … +10 V / 0 … 10 V
Ri ≈ 120 kOhm
0 … 20 mA / 4 … 20 mA
Ri ≈ 100 Ohm
14 bit (± 13 bit)
0.1 %
100 μs (in accordance to 10000 measuring values per second)
1 kHz (with 10 sampling points)
approx. 4.8 V (+/- 0.1%)
Ri ≈ 240 Ohm
screw terminal, 1.5 mm² / AWG 14
Control inputs:
Number of inputs:
Characteristic:
Signal levels:
Internal resistance:
Input current:
Minimum pulse time:
Connections:
4
PNP, active high
HTL: LOW = 0 … 3 V, HIGH = 10 … 30 V
Ri ≈ 1.5 kOhm
approx. 2 mA
1 msec (5 μs at Cont.1 when [HW-Z-Reference] ≠ 0)
screw terminal, 1.5 mm² / AWG 14
Incremental output:
Signal levels:
Channels:
Frequency range:
Output current:
Output circuit:
Reaction time:
Fastest position
change possibility:
Protection circuit:
Connections:
HTL: 5 … 30 V (depends from the external supply)
or TTL / RS422: 4 V (no external supply necessary)
A, /A, B, /B, Z, /Z
0.01 Hz … 1 MHz
max. 30 mA (per channel)
push-pull
< 260 µs
1 increment / μs
short circuit proof
screw terminal, 1.5 mm² / AWG 14
SSI interface:
Function:
Standard:
Clock (input):
Data (output):
Termination resistors:
SSI baud rate:
Connections:
simulates an SSI absolute encoder
according to the SSI standard, 10 … 25 bit, binary or Gray
(supports only single transmission but not multiple-transmission)
TTL-differential / RS485 [Clk+], [Clk-]
TTL-differential / RS485 [Dat+], [Dat-]
internally not provided
max. 1 MHz
screw terminal, 1.5 mm² / AWG 14
Serial interface:
Format:
Baud rates:
Connections:
RS232 or RS485 (2- or 4-wire)
600, 1200, 2400, 9600 (Default), 19200,
38400, 56000, 57600, 76800 and 115200
SUB-D connector (female), 9-pin
USB interface:
Version:
Driver:
Connections:
USB 2.0
motrona_vcom.inf (download on www.motrona.com)
by USB-Port, connector type „A