User Manual

PRESETS
50
Stage I/O to network
As another example, you could run an Ethernet
cable from the stage unit to a MOTU AVB Switch,
with a host of other MOTU AVB interfaces and
computers on a multi-device network.
Figure 5-5: Use the Stage I/O preset to connect audio inputs and
outputs to other AVB devices on the rest of the network.
STUDIO INPUT EXPANDER
Use the Studio Input Expander preset when you
already have a main system set up, but you want to
add additional inputs. This preset routes all
physical inputs (analog and digital) on the
expansion MOTU AVB interface to AVB network
streams. You can connect to these expansion
streams in AVB Stream Connections section of the
Device tab of the main MOTU AVB interface.
STUDIO OUTPUT EXPANDER
Use the Studio Output Expander preset when you
already have a main system set up, but you want to
add additional outputs. This preset routes AVB
network streams to all physical outputs (analog
and digital) on the expansion MOTU AVB
interface. You must choose which network streams
are used in the AVB Stream Connections section of
the Device tab of the expansion MOTU AVB
interface.
Audio inputs from musicians on stage
Stage area
Switch A
24Ai