User Manual-for Windows

CHAPTER
17
3
IMPORTANT! Run the 828mk3
Software Installer First
OVERVIEW
Install the 828mk3 software first! . . . . . . . . . . . . . . . . . . . . 17
Installing the 828mk3 software . . . . . . . . . . . . . . . . . . . . . . 17
MOTU Audio Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MOTU ASIO Driver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
The MOTU WDM audio driver. . . . . . . . . . . . . . . . . . . . . . . . 18
CueMix FX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MOTU SMPTE Console . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
INSTALL THE 828MK3 SOFTWARE FIRST!
Before you connect the 828mk3 audio interface to
your computer and turn it on, insert the 828mk3
software CD and run the 828mk3 Software
Installer. This ensures that all the 828mk3
components are properly installed in your system.
If Windows asks you to locate the drivers
If you’ve already connected the 828mk3 to your
computer and switched it on, Windows probably
issued an alert notifying you that the 828mk3
requires drivers, followed by another window
asking you to locate the drivers on disk. If this
happens:
1 Cancel the driver search.
2 Switch off the 828mk3.
3 Run the 828mk3 Software Installer as instructed
in the next section.
INSTALLING THE 828MK3 SOFTWARE
To install the 828mk3 software, insert the MOTU
Audio installer disc and follow the directions it
gives you on your computer screen. Also be sure to
read the Read Me file for installation assistance.
The 828mk3 ships with the following software and
drivers for Windows:
Software
component Purpose
MOTU Audio Con-
sole
Provides access to all of the settings in
the 828mk3 hardware.
CueMix FX Gives you complete control over the
828mk3’s CueMix FX on-board mixer,
which provides no-latency monitoring,
mixing and processing of live inputs
through your 828mk3.
MOTU ASIO Driver Allows Cubase or other ASIO-compli-
ant software to do multi-channel input
and output with the 828mk3. Only
required if you are using Cubase or
another ASIO-dependent program.
MOTU WDM Driver Allows any WDM-driver compatible
audio software to do multichannel input
and output with the 828mk3.
MOTU MIDI Driver Provides MIDI input and output via the
828mk3 MIDI ports.
MOTU SMPTE Con-
sole
Provides access to the 828mk3’s SMPTE
time code and video sync features.
!828mk3 Hyb Manual/Win Page 17 Monday, March 28, 2011 6:11 PM