User Manual-for Windows

CONFIGURING WINDOWS AUDIO SOFTWARE
56
Figure 7-9: Enabling the MOTU WDM driver in SONAR.
4 Next, in the Audio preferences section, choose
Devices.
5 Check the 828mk3 Hybrid inputs and outputs
that you wish to use and uncheck the ones you
don’t, as shown in Figure 7-7 on page 55.
Other audio settings in SONAR
There are a few other settings in SONAR that
impact 828mk3 operation:
1 In the Audio preferences section, choose Driver
Settings.
2 Choose an 828mk3 input and output for
recording and playback timing as shown below in
Figure 7-10. It doesn’t matter which input or
output you choose.
Figure 7-10: Make sure you have chosen a 828mk3 input and output
for the playback and recording timing master settings.
3 Additionally, if you are using the MOTU WDM
driver, click the Wave P rofi ler button and run the
Wave Profiler. This process chooses the optimum
settings for the 828mk3 hardware.
Figure 7-11: Running the Wave Profiler in Cakewalk’s SONAR.
!828mk3 Hyb Manual/Win Page 56 Monday, March 28, 2011 6:11 PM