User Manual-for Mac
CHAPTER
17
2
Packing List and
System Requirements
PACKING LIST
The 896mk3 Hybrid ships with the items listed
below. If any of these items are not present in your
896mk3 box when you first open it, please
immediately contact your dealer or MOTU.
■
One 896mk3 Hybrid I/O rack unit
■
One 9-pin to 9-pin IEEE 1394 “FireWire” B cable
■
One USB cable
■
Power cord
■
One 896mk3 Hybrid Mac/Windows manual
■
One cross-platform installer disc
■
Product registration card
MAC SYSTEM REQUIREMENTS
The 896mk3 system requires the following Mac
system:
■
PowerPC G4 CPU 1 GHz or faster (including
PowerPC G5 CPUs and all Intel processor Macs)
■
■
1 GB RAM; 2 GB or more recommended
■
Mac OS X version 10.5, 10.6, or 10.7; v10.5.8 or
later required
■
Available FireWire or USB2 port
■
A large hard drive (preferably at least 250 GB)
PLEASE REGISTER TODAY!
Please register your 896mk3 today. There are two
ways to register.
■
Visit www.motu.com/register
OR
■
Fill out and mail the included product
registration card
As a registered user, you will be eligible to receive
technical support and announcements about
product enhancements as soon as they become
available. Only registered users receive these
special update notices, so please register today.
Be sure to do the same for the included AudioDesk
software, which must be registered separately. You
can do so online or by filling out and mailing the
included software registration card found at the
beginning of your AudioDesk manual. Please be
sure to register AudioDesk as well, so that you will
be eligible to receive technical support and
announcements about AudioDesk software
enhancements as soon as they become available.
Thank you for taking the time to register your new
MOTU products!
896mk3 Hybrid book Page 17 Friday, August 19, 2011 1:44 PM