User Manual-for Mac

INSTALLING THE 896MK3 HARDWARE

A TYPICAL 896MK3 SETUP

Here is a typical 896mk3 studio setup. This rig can

be operated without a conventional mixer. All

mixing and processing can be done either in the

896mk3, in the computer with audio software, or

both. During recording, you can use the 896mk3’s

CueMix™ FX mixer to apply reverb, EQ and

compression to what you are recording and

monitor it via the main outs, headphone outs, or

any other output pair. You can control everything

from the included CueMix Console software.

Figure 4-6: A typical 896mk3 studio setup.

Pedal jack (on front panel)

mic

AES/EBU

DAT deck

quarter-inch analog outs

synthesizer

monitors

guitar

quarter-inch analog outs

synths, samplers, effects units, etc.

sends to

FX unit (in

rack

below)

headphones

Headphone jack (on front panel)

other outputs

(stage

monitors,

etc.)

foot switch

Mac

MOTU 8pre and/or

other optical devices

Optical output

FireWire or USB

896mk3 Hybrid book Page 26 Friday, August 19, 2011 1:44 PM