User Manual-for Windows

MOTU AUDIO CONSOLE
45
AES/EBU Out options
Choose the desired AES/EBU Out sample rate
options (Figure 4-17 on page 32) when the desired
AES/EBU output rate needs to be completely
different than the system clock rate or the AES In
clock rate. For further details about this option, see
“Sample Rate Convert” on page 44.
Clip Hold Time
The Clip Hold Time option controls how long the
top red LED on the front panel metering remains
illuminated after clipping occurs.
Peak Hold Time
The 896mk3 front-panel level meters support
standard peak/hold metering, where the LED for
the highest level recently measured on the channel
remains illuminated for a brief period of time while
the rest of the LEDs below it remain fully dynamic.
The Peak Hold Time controls how long the peak-
hold LED remain illuminated before going dark
again.
Word Out
The Word O ut menu appears when the 896mk3 is
operating at a 2x sample rate (88.2 or 96kHz) or 4x
sample rate (176.4 or 192kHz). This menu lets you
set the word clock output either to match the
current sample rate (System Clock) or force it to the
corresponding 1x rate (either 44.1 or 48kHz). For
example, if the 896mk3 were operating at
176.4kHz, choosing the Force 44.1/48kHz option
would produce word clock output at 44.1kHz.
896mk3 Hybrid book Page 45 Friday, August 19, 2011 2:04 PM