User Manual-for Windows

FRONT PANEL OPERATION
50
896MK3 SETUP MENU
To access the 896mk3 SETUP menu, push the
PAR AM kno b unt i l you s e e 896mk3 SETUP
displayed in the LCD. This menu provides basic
features for managing the 896mk3 hardware. Turn
the PARAM knob to access each setting, explained
briefly below.
LCD Contrast
Turn the VALUE knob to adjust the LCD contrast.
Figure 6-8: In setup mode, the LCD displays a setup parameter in the
top row of the LCD and the current setting in the bottom row.
Save/Name Preset
An 896mk3 preset holds all current CueMix FX
mix settings (everything in the CUEMIX menu).
SETUP menu and AUDIO menu parameters are
not included. Turn the VALUE knob to move from
character to character in the preset name. Turn
PAGE to change the currently flashing letter. Once
you’ve named the preset, push VALUE to save it,
turn it again to choose the desired preset slot you
wish to save it to (1-16), and then push again to
confirm the save. Cancel the save operation at any
time by turning the PARAM knob.
Load Preset
Turn VALUE to choose the preset you wish to load
(1-16) and push VALUE to load it.
AutoSave Status
All of the parameters in the 896mk3 are
periodically saved automatically in its memory, so
that if you power down the unit, it will power back
Figure 6-6: The 896mk3 Hybrid front panel controls.
The LCD is divided into four
sections that correspond to the
four knobs below.
Push the PARAM knob to cycle
among three global menus:
CUEMIX (mixer), AUDIO
(settings) and 896mk3 SETUP.
When viewing CueMix settings in the
LCD, push the CHANNEL knob to cycle
among four main mixer menus: MIX,
IN (inputs), OUT (outputs) and
REVERB. Turn it to choose a channel.
Turn the PAGE knob to view settings for
each channel. Push it to jump to the
next section or back to the beginning.
Turn and/or push the
VALUE knob to adjust
the current setting.
896mk3 Hybrid book Page 50 Friday, August 19, 2011 2:04 PM