User Manual-for Windows

CUEMIX FX
74
Each mix bus is independent
Each mix bus has its own settings. Settings for one
bus will not affect another. For example, if an input
is used for one bus, it will still be available for other
busses. In addition, inputs can have a different
volume, pan, mute and solo setting in each bus.
Input channels
The Inputs tab (Figure 9-3 on page 77) gives you
access to settings for individual 896mk3 inputs (or
input pairs), such as phase, trim, EQ and dynamics
processing. Each input also includes a send to the
896mk3’s global reverb processor. These settings
are applied to the signal before it goes anywhere
else (to a mix bus or the computer).
Output channels
The Outputs tab (Figure 9-6 on page 80) gives you
access to settings for each 896mk3 output pair,
including EQ, dynamics processing and send/
return controls for feeding and returning the
output signal to/from the 896mk3’s global reverb
processor. These settings are applied to the signal
just before it is sent to the output.
Channel focus and settings
Click the focus button for a channel (Figure 9-1) to
view channel-specific parameters in the Channel
Settings section of the CueMix FX window
(Figure 9-1). Separate tabs are provided for
channel-specific settings (channel strip, EQ and
dynamics), plus the global meter bridge and reverb
processor.
Global reverb processor
The 896mk3 has a global reverb module
(Figure 9-23 on page 94). Once it has been
activated, you can feed signals to the reverb
processor from various points in the 896mk3 mix
matrix via input sends, bus sends and output
sends. Stereo output from the reverb processor can
then be fed back to mix busses or output pairs
using reverb returns.
Other features
CueMix offers many additional features, discussed
in this chapter, such as talkback/listenback,
extensive metering, graphic editing of certain
effects parameters, monitor grouping and more.
Widening the CueMix FX window
To view more input faders at once, drag the right-
hand edge of the window to the right.
896mk3 Hybrid book Page 74 Friday, August 19, 2011 2:04 PM