User Manual

SOFTWARE INSTALLATION AND SETUP
20
SOFTWARE INSTALLATION FOR WINDOWS
Your MOTU interface requires software drivers. It also
includes ClockWorks™, a setup program that gives you
convenient access to your MOTU interface’s numerous
features.
Software installation will go a little more smoothly if you
turn off your interface before switching on your computer.
Don’t worry, however, if you’ve already done so. Just follow
the directions below.
To install the MOTU USB MIDI software:
1 Turn on your computer (if you haven’t already done so).
2 If the Windows Add Hardware Wizard appears during
startup, do not proceed and exit from the Wizard.
Instead of installing the MOTU USB MIDI drivers
manually via the Wizard, you will run the MOTU USB
software installer.
3 Insert the MOTU USB software installer CD in the
computer’s CD drive (if you haven’t already).
4 If the MOTU USB software installer program does not
automatically begin running, double-click SETUP.EXE on
the installer CD to launch it.
5 Follow the directions the installer gives you.
That’s it!
What gets installed?
The MOTU USB software installer installs drivers for your
MOTU USB MIDI interface, as well as the ClockWorks
application, which gives you access to many of your
interface’s features, including synchronization, MIDI
processing and preset management.
You can find ClockWorks in the Windows Start menu
under
Programs>MOTU .
!USB Interfaces Manual Book Page 20 Tuesday, August 16, 2011 11:21 AM