User Manual

CLOCKWORKS
34
2. or send the MMC transport commands to the MOTU
interface instead and have it redistribute them to the other
MMC device(s)
If you would like to bypass the interface and control a
MMC device directly from your computer software
(choice #1 above), remove the connection from the
computer icon on the left to the MMC icon on the right.
If you plan to use choice #2 above, maintain the
connection, and also make a connection from your
MOTU interface’s MMC Out port on the left to the MMC
device’s destination MIDI port on the right.
Connecting an MMC controller
If you would like to control your MOTU interface from a
MMC controller connected to one of its MIDI inputs,
connect the device’s input cable to the MMC In port.
THE PRESETS TAB
The Presets tab lets you name the users presets in your
MOTU interface and choose which one is active (by
clicking the button next to its name). For complete details
about presets, see “Front Panel Presets” on page 49.
Figure 5-4: The Presets tab.
!USB Interfaces Manual Book Page 34 Tuesday, August 16, 2011 11:21 AM