User Manual

CLOCKWORKS

Whenever you would like to mute data, begin with the

following procedure:

1 If you have more than one MOTU interface, select the

box you want to mute in the File menu.

2 Click the Mutings tab.

3 Select the type of data to be muted from the Mute

menu.

Doing so makes the check box grid control the type of

MIDI data you choose.

4 Choose Input or Output from the cables menu.

Doing so makes the check box grid control muting for

either MIDI IN ports or MIDI OUT ports.

Now you are ready to click check boxes in the grid to mute

data.

Muting data on a single channel

To mute data on a single MIDI channel for a device, click

the appropriate check box in the grid. Check boxes are

numbered from left to right, with each row representing a

MIDI input or output port.

Muting a data type on all channels

To mute a data type on all 16 channels for a device, drag

across its row of check boxes. Doing so will select all check

boxes in the row, selecting all channels for muting.

Muting on all channels, all cables

To mute a data type on all channels and all inputs, choose

Inputs from the cable menu and click Set All. To do the

same for outputs, choose Outputs from the Cable menu

and click Set All.

Unmuting data

To unmute data on a single channel, deselect its check box.

To unmute data on all channels and cables, click Clear.

!USB Interfaces Manual Book Page 36 Tuesday, August 16, 2011 11:21 AM