User Manual

CLOCKWORKS
48
Sending sysex data with a pedal
A pedal can transmit a sysex message up to 27 bytes long.
To program the sysex message:
1 Set up the knob or pedal as described in the previous
sections.
Once you have selected system exclusive as the type of
data, you’ll see the sysex data entry window.
2 Click inside the sysex data entry box and type in the
bytes necessary.
The message can be up to 27 bytes long, including the F0
and F7 at the beginning and end of the message.
3 Set the output assignment as described in “Channel” on
page 47.
FUTURE UPDATES
Visit www.motu.com for information about future
updates for ClockWorks.
!USB Interfaces Manual Book Page 48 Tuesday, August 16, 2011 11:21 AM