User Manual

HARDWARE INSTALLATION
34
AVB ETHERNET AUDIO INTERFACE SETUP
Use this setup if you want to use the 828es as an
AVB Ethernet audio interface for a recent-
generation Mac (i.e. any Mac with a Thunderbolt
port on it). OS X El Capitan (10.11) or later is
required for AVB audio I/O.
■ Use a standard CAT-5e or CAT-6 cable.
■ Connect to the computer’s Ethernet port.
See “Setup for AVB Ethernet audio interface
operation” on page 40.
About CAT-5e cables
Use shielded CAT-5e or
CAT-6 cables, which are a
higher grade version of a
standard Ethernet cable.
They are available wherever
network cables are sold.
SETUP FOR TWO INTERFACES
Use this setup if you want to connect two MOTU
interfaces to your computer.
■ The connection to the computer can be either
USB or Thunderbolt, if you have a Thunderbolt-
equipped MOTU interface such as the 828es, 8M,
16A, 1248, 112D, 624or 8A.
■ Use a standard Thunderbolt cable. Place it at the
end of the Thunderbolt chain.
■ Use any standard CAT-5e Ethernet network
cable to connect the two interfaces together using
their NETWORK ports.
■ As an alternative, see “Setup for multiple
interfaces” on page 37.
OR