User Manual

HARDWARE INSTALLATION

☛ MOTU interfaces currently only support

8-channel streams (or less) so be sure to avoid

configurations with streams that have more than

eight channels.

Figure 5-8: Choosing an AVB configuration for the Mac.

4 From the Sample Rate menu (Figure 5-7),

choose the desired sample rate. Currently, the Mac

only supports 48, 96 and 192 kHz sample rates.

5 For Playback from the Mac, go to the Device

tab for your MOTU interface (the 1248 in the

example below), and connect the input streams to

the Mac’s output streams.

Figure 5-9: Routing computer streams to the interface for playback

from the Mac.

6 In the Routing tab, route the Mac’s output

streams to desired physical outputs on your

MOTU interface.

Figure 5-10: Routing Mac channels to physical outputs.

7 For Recording to the Mac, route desired

physical inputs on your MOTU interface to output

streams.

Figure 5-11: Routing physical inputs to the Mac.

8 On the Mac’s Device tab, connect the Mac’s

input streams to the MOTU interface’s output

streams.