User Manual

FRONT PANEL OPERATION
62
Dim
If you are feeding a monitor mix to the musicians
on the same Aux bus as your talkback mic, use the
Dim knob (Figure 7-8) to control how much the
monitor mix will be attenuated when talkback is
engaged. This gives you control over the relative
volume between the talkback mic signal and all
other audio on the mix bus. To control overall
volume of everything, use the bus fader.
NET ID
Push NET ID (item #13 on page 9) to immediately
view the 828es network information, including its
IP Address. Push BACK or METERS to return to
the meters.
HEADPHONE VOLUME
Each headphone jack has independent volume
control. The LCD provides visual feedback.
STAND-ALONE OPERATION
All settings, including mix settings and device
settings, are saved in the 828es memory. They
remain in effect even when the interface is not
connected to a computer. This allows you to use
the 828es as a stand-alone mixer. You can make
adjustments to any setting at any time from the
web app running on a device that has a network
connection to the 828es, as explained in “Setup for
web app control” on page 38.