User Manual

CONFIGURING HOST AUDIO SOFTWARE
57
Digital Performer and AudioDesk
In MOTU Digital Performer or AudioDesk, choose
Configure Audio System > Configure Hardware
Driver from the Setup menu, as shown in
Figure 7-2. Choose MOTU 828x from the list of
CoreAudio drivers.
Figure 7-2: Enabling the 828x in Digital Performer
Pro Tools
In Avid Pro Tools, go to the Setup menu and
choose Playback Engine as shown in Figure 7-3.
Choose the MOTU 828x from the Current Engine
menu. For information about the H/W Buffer Size
setting, see “Adjusting the audio I/O buffer” on
page 65.
☛ Pro Tools 9 or later is required for operation
with the 828x.
Figure 7-3: Enabling the 828x in Pro Tools