User Manual

WORKING WITH HOST AUDIO SOFTWARE
54
Working with AVB network streams
Audio channels going to networked AVB interfaces
can be streamed to and from your host audio
software through the UltraLite AVB connected
directly to the computer. For information about
how to set this up, see “Mapping computer
channels to network streams” on page 69.
Mirroring computer channels to multiple
outputs
Figure 7-1 shows an example of mirroring one
stereo audio stream from host audio software to
several outputs. In the example, computer
channels 1-2 are being sent to Phones L-R and
Main L-R. To route a source to multiple
destinations, click multiple boxes in its column,
(see computer channels 1-2 in Figure 7-1).
Combining multiple sources to one output
To merge (mix) any channels in the grid (computer
streams or otherwise), route them to mixer inputs
and then use the on-board mixer (“Mixing tab” on
page 15).
Routing grid tutorials
For further information about using the routing
grid, including many useful tips and techniques,
visit:
www.motu.com/techsupport/technotes/avbrouting
and
www.motu.com/avb
CHOOSING THE MOTU AVB AUDIO DRIVER
Once you’ve made the preparations described so
far in this chapter, you’re ready to run your audio
software and enable the MOTU AVB audio driver,
which allows your host software to use the
UltraLite AVB as an audio interface.
For Mac OS X audio software
For audio software running under Mac OS X, go to
the menu item or preference where you choose the
audio device (Core Audio driver) you wish to use,
and then select the UltraLite AVB by name.
For Windows audio software
For audio software running under Windows, go to
the menu item or preference where you choose the
ASIO driver you wish to use, and then choose
MOTU AVB USB ASIO. If your host audio software
doesn’t support ASIO, choose the MOTU AVB USB
AU D I O Wave dr iver ins tead .
Figure 7-3: Choosing the MOTU AVB ASIO driver in Cubase.
Where to go in popular audio hosts
Here is the location for this setting in various
popular audio software host applications:
Other audio software
Consult your software’s manual for further
information.
Host software Location for choosing the UltraLite AVB
Digital Performer
and AudioDesk
Setup menu > Configure Audio System >
Configure Hardware Driver
Pro Tools 9 or later Setup menu > Playback Engine or Current
Engine
Logic Pro Preferences > Audio tab > Devices tab >
Core Audio tab
Garage Band Garage Band menu > Preferences > Audio/
MIDI > Audio Output/Input menus
Cubase and
Nuendo
Device Setup > Devices list > VST Audio
System menu
Live Preferences > Audio tab
Reason Preferences > Audio preferences
Reaper Preferences > Audio prefs > Devices