User Manual-Mac

MOTU SMPTE CONSOLE
120
Stripe
Click this button to start or stop time code. To set
the start time, click directly on the SMPTE time
code display in the Generator section and type in
the desired start time. Or drag vertically on the
numbers.
Figure 14-2: Setting the time code start time.
Regenerate
This option, when enabled, causes the generator to
generate time code whenever the PCI-424 system is
receiving either SMPTE time code or ADAT Sync
(via its ADAT Sync In port).
Generate from sequencer
This option, when enabled, causes the generator to
generate time code whenever you are running
AudioDesk or Digital Performer. Time code begins
at the time speciļ¬ed by the AudioDesk or Digital
Performer main transport.
Click here to edit
the start time, or
drag vertically on
the numbers.