User Manual-Mac

SOUND MANAGER
99
4 As shown in Figure 10-2, check the box next to
the input pair you would like to use for Sound
Manager.
5 Quit the MOTU PCI Audio Console.
CONFIGURING THE SOUND CONTROL
PANEL
Once you’ve made the preparations discussed in
the previous section in the MOTU PCI Audio
Console, you are ready to make your final settings
in the Sound Control Panel as follows:
1 Open the Sound Control Panel.
2 Choose Alert Sounds from the menu.
Figure 10-3: Lower the alert sound volume to avoid getting blasted
by it through your PCI-424 hardware.
3 Lower the Alert Volume. This prevents the
Macintosh alert sound from blurting out of your
2408mk3 system.
4 Click the Input tab and choose the desired
2408mk3 input pair.
Figure 10-4: Choosing the desired input for Sound Manager. Any
input pairs that are currently checked in the MOTU PCI Audio Console
will appear in this list.
5 Click the Output tab and choose the PCI-424. To
learn how to specify the output pair, see the next
section, “Changing the output”.
6 Make sure that the Main Volume setting is not
muted. If your audio software has its own volume
control for Sound Manager output, raise this
volume slider to full volume. You can attenuate it as
needed in your audio software.