User Manual-Windows

CHAPTER
13
EXPANSION I/O OR CORE SYSTEM?
Read this chapter if you have purchased a MOTU
PCI audio interface as an Expansion I/O for a
PCI-424 core system. If not, skip to the next
chapter.
PACKING LIST FOR AN EXPANSION
INTERFACE
Each MOTU Expansion interface ships with:
■ One rack-mount audio interface (2408mk3,
24I/O or HD192)
■ One 15-foot “Audio Wire” cable
■ One CD-ROM with drivers and Setup Wizard
■ Power cord
■ One 2408mk3 manual and reg card
INSTALLING AN EXPANSION INTERFACE
To connect your expansion interface to a PCI-424
core system, use one of the three available Audio
Wire sockets on your core system’s PCI-424 card as
shown on page 5.
Connect the other end of the Audio Wire cable to
the Audio Wire socket on the interface as
demonstrated below with the 2408mk3 in Figure 1.
Figure 1: Attaching the Audio Wire cable to an expansion interface.
IMPORTANT NOTE
Always power on your expansion interface when
operating your core system. In fact, you should
turn on all audio interfaces connected to the
PCI-424 card.
COMPLETING THE INSTALLATION
To complete the installation, open the PCI Audio
Console to confirm that the PCI-424 card sees the
newly installed interface and to configure your
multi-interface system. For details, turn to
chapter 9, “Expanding Your PCI-424 System”
(page 87).
SYNCHRONIZATION AND CLOCK SOURCE
For details about synchronizing an expanded
system, see “Synchronizing multiple interfaces” on
page 89.
Quick Reference: Expansion Interfaces