User Manual

APPENDIX B: AUDIO SPECIFICATIONS
87
8M
Line Out
Connector Type 1/4” Female, TRS Balanced, Tip hot
Output Impedance 100 ohm Per leg
Dynamic Range 123 dB A-weighted
THD+N -110 dB (0.0003%) -1 dBFS, Unweighted, 1 kHz
Frequency Response +0 -0.1 dB, 20 Hz/20 kHz Ref. 1 kHz
Max Level Out +20 dBu
Trim Range 24 dB in 1 dB steps -4 dBu to +20 dBu
MIC in
Connector Type Combo-style, XLR / TRS Pin 2 hot, tip hot
XLR
Impedance load 3 k ohm, 4.5 k with Pad
Pad -20 dB, Switchable per channel
Phantom power +48 v, switchable per channel DIN 45596 / IEC 61938-P48
EIN -128 dBu XLR Terminated
Dynamic Range 112 dB A-weighted
THD+N -104 dB Unweighted
Frequency Response +0 -0.1 dB, 20 Hz/20 kHz Ref. 1 kHz
Max Level In with Pad +24 dBu V-Limit starts at 17 dBu
Max Level In without Pad +5 dBu V-Limit starts at 4 dBu
Trim range 0 to +53 dB in 1 dB steps
TRS
Description Balanced or single ended Suitable for line or instrument (guitar)
Impedance Load 1 meg ohm differential
Pad -20 dB, Switchable per channel
Phantom power No
Dynamic Range 112 dB A-weighted
THD+N -102 dB -1 dBFS, Unweighted
Frequency Response +0 -0.1 dB, 20 Hz/20 kHz Ref. 1 kHz
Max Level in with Pad +17 dBu V-Limit starts at +7 dBu
Max Level in without Pad +5 dBu V-Limit starts at -3 dBu
Trim range 0 to +53 dB in 1 dB steps
V-Limit Compressor Range 9 dB
Phones
Connector Type 1/4” Female, TRS Stereo Tip Left, Ring Right
Dynamic Range 102 dB A-Weighted
THD+N -92 dB Unweighted
Drive Max. 80 mw 16/32/55 ohms
Frequency Response +0 -0.27 dB, 20 Hz/20 kHz Ref. 1 kHz
Trim Range -128 dB (muted) to 0, in 1 dB steps