User Manual

WORKING WITH HOST AUDIO SOFTWARE

Streaming computer audio to and from the

on-board mixer

In Figure 7-1, you’ll see mixer inputs across the top

of the grid (main, monitor, aux, etc.) These are

output busses from your interface’s on-board

mixer. To route one of these mix busses to your

host computer software, click the grid at the

intersection of the mix column and desired

computer channel row. Now, the mix bus output

will be routed to the computer via the channel you

selected.

Conversely, you can stream audio from the

computer into the mixer. Channels coming from

the computer are represented across the top of the

routing grid as inputs. To route a computer channel

to the mixer, click the grid at the intersection of the

computer channel column and the desired mix

input row. Now, that computer channel will be

routed to the mixer input.

Figure 7-2: An example of routing physical inputs on the Monitor 8 to computer channels (for host audio software).