User Manual
HARDWARE INSTALLATION
41
☛ MOTU interfaces currently only support
8-channel streams (or less) so be sure to avoid
configurations with streams that have more than
eight channels.
Figure 4-8: Choosing an AVB configuration for the Mac.
4 From the Sample Rate menu (Figure 4-7),
choose the desired sample rate. Currently, the Mac
only supports 48, 96 and 192 kHz sample rates.
5 For Playback from the Mac, go to the Device tab
for your MOTU interface (the 1248 in the example
below), and connect the input streams to the Mac’s
output streams.
Figure 4-9: Routing computer streams to the interface for playback
from the Mac.
6 In the Routing tab, route the Mac’s output
streams to desired physical outputs on your MOTU
interface.
Figure 4-10: Routing Mac channels to physical outputs.
7 For Recording to the Mac, route desired physical
inputs on your MOTU interface to output streams.
Figure 4-11: Routing physical inputs to the Mac.
8 On the Mac’s Device tab, connect the Mac’s
input streams to the MOTU interface’s output
streams.