User Manual
Table Of Contents
- Title Page
- Quick Start Guide
- LP32 Front Panel
- LP32 Rear Panel
- MOTU Pro Audio Control Web App
- Overview
- It’s not on your hard drive
- Use your favorite web browser
- Control from multiple devices
- Run the installer, get the app
- Make hardware and network connections
- Launching the web app
- Device tab
- Device tab (continued)
- Device tab (continued)
- Routing tab
- Mixing tab
- Aux Mixing tab
- Mixer input channel strips
- Main Mix and Monitor channel strips
- Aux bus channel strips
- Group and Reverb channel strips
- 1 About the LP32
- Comprehensive I/O
- Flexible optical I/O
- Network I/O
- Other MOTU AVB interfaces
- Universal computer connectivity
- On-board DSP with mixing and effects
- 32-bit floating point processing
- Modeled vintage effects processing
- AVB/TSN system expansion and audio networking
- Matrix routing and multing
- Web app control
- Stand-alone mixing with wireless control
- Comprehensive metering
- Headphone output
- Rack mount or desktop operation
- Audio analysis tools
- AudioDesk
- 2 Packing List and System Requirements
- 3 Software Installation
- 4 Hardware Installation
- Overview
- USB or iOS audio interface setup
- AVB Ethernet audio interface setup
- Setup for two interfaces
- Setup for three to five interfaces
- Setup for a multi-switch network
- Setup for multiple interfaces
- Setup for web app control
- Setup for AVB Ethernet audio interface operation
- Audio connections
- Synchronization
- Syncing optical devices
- Syncing word clock devices
- Syncing an AVB network
- Syncing multiple AVB audio interfaces connected to a Mac
- 5 Presets
- 6 The Front Panel LCD
- 7 Working with Host Audio Software
- Overview
- Preparation
- Run the web app
- Choose the MOTU Pro Audio driver
- Reducing monitoring latency
- Monitoring through the LP32
- Direct hardware playthrough / Direct ASIO monitoring
- Monitoring through your host audio software
- Adjusting your host software audio buffer
- Adjusting buffer size on Mac OS X
- Adjusting buffer size on Windows
- Lower latency versus higher CPU overhead
- Transport responsiveness
- Effects processing and automated mixing
- Working with the Routing grid
- Enabling and disabling input/output banks
- Specifying the number of computer channels
- Making inputs and outputs available to your host software
- Configuration presets
- Naming computer input and output channels
- Streaming computer audio to and from the onboard mixer
- Working with AVB network streams
- Mirroring computer channels to multiple outputs
- Combining multiple sources to one output
- Routing grid tutorials
- Working with on-board mixing and effects
- 8 Mixer Effects
- 9 MOTU Audio Tools
- 10 Networking
- A Troubleshooting
- B Audio Specifications
- C Mixer Schematics
- D Updating Firmware
- E OSC Support
- Index
LP32 Front Panel
1. HEADPHONE OUTPUT with volume control. The LCD
provides visual feedback with a volume meter. Double-
tap the knob to mute/unmute. Hold in the knob to lock
the volume meter on screen; hold it in again to unlock
and dismiss.
2. Push ID to display network settings for the device,
including its IP address.
3. Push SEL (select) to enter the LCD menu. Push the
ARROW buttons to scroll through menu options. Push
SELECT again to descend into the submenus, if applica-
ble. To choose the current setting, push SELECT a third
time. Push BACK to return to the previous menu level,
and do so repeatedly to exit the menu altogether.
4. This portion of the LCD displays level meters for all four
banks of optical inputs and outputs, plus phones (PH).
It can also show device settings and network informa-
tion, using the buttons to the left.
5. Power switch.
6. This portion of the multi-purpose color LCD shows
audio activity over the LP32’s AVB/TSN network port (in
and out).
7. This portion of the LCD displays the current sample rate
and clock source, such as
Int
(Internal clock mode).
7
1 3 5
6
42