User Manual

STREAMERS, PUNCHES AND FLUTTERS
764
video interface such as the HDX-SDI. Visual cues
are composited “on the fly” and combined with the
movie video. No pre-rendering is necessary.
To enable the display of streamers, flutters and
punches on live video output, enable the Movie
Overlay option (Figure 66-3). For complete
information about the Movie window, see
chapter 32, “Movie Window” (page 297).
SUPPORTED FILM CUE HARDWARE
Digital Performer supports several hardware
devices that can generate streamers, flutters and
punches over a video input signal:
SETTING UP THE VTP OR DTP
For information about setting up the Video
Timepiece or Digital Timepiece to generate
streamers, consult the Digital Timepiece or Video
Timepiece manual. Essentially, all you need to do is
add it to your your MIDI device configuration
(Setup menu > Bundles > MIDI Devices tab) and
make sure its MIDI connections are working
properly.
SETTING UP THE PROCUE 1M1 OR
CLICKSTREAMMACHINE
Add the ProCue 1m1 or ClickStreamMachine to
your MIDI device configuration (Setup menu >
Bundles > MIDI Devices tab) and make sure it is
connected to your MIDI interface as demonstrated
below for the 1m1:
Figure 66-1: Adding the ProCue 1m1 or ClickStreamMachine to your
MIDI device configuration.
Make sure that the video deck or other video
source feeding the 1m1 or ClickStreamMachine is
synchronized with Digital Performer. In the
example below, a MOTU MIDI Timepiece AV is
being used to synchronize Digital Performer to the
video deck via SMPTE time code from the video:
Manufacturer Web site Device
MOTU www.motu.com Digital Timepiece
MOTU www.motu.com Video Timepiece
CueLine www.cueline.com ProCue 1m1
ClickStreamMachine www.clickstream-
machine.com
ClickStreamMa-
chine