User Manual

24Ao Front Panel

1. ANALOG OUTPUT METERS for the twenty-four analog

outputs.

2. ADAT OPTICAL input and output metering. At 1x sample

rates (44.1 or 48 kHz), there are twenty-four channels of

input and output. At 2x (88.2 or 96 kHz), there are twelve

channels.

3. The CLOCK section displays the current operating sample

rate and clock mode (source) for the unit.

4. POWER SWITCH: AVB and USB are “plug-and-play” proto-

cols. That means you can turn the 24Ao off and back on

without restarting your computer.

5. Push SEL (select) to enter the LCD menu. Push the

ARROW buttons to scroll through menu options. Push

again to descend into the submenus, if applicable. To

choose the current setting, push SELECT a third time.

Push BACK to return to the previous menu level, and do

so repeatedly to exit the menu altogether.

6. Push ID to display network settings for the device,

including its IP address.

321 4