User Manual

MIXER EFFECTS

setting represents the bottom frequency of the Mid

band. The Ratio determines the length for each

band speciﬁed in a percentage of the low frequency

reverb time.

DSP USAGE

The DSP Usage meter (item #26 on page 19) shows

how much of the available DSP processing power is

currently being used by the mixer for the mix and

for effects processing. If there aren’t enough DSP

resources for all effects to be enabled on a channel,

effects are disabled for that channel and all

subsequent channels.

☛ Unlike other effects, HPF and EQ on a stereo

channel requires approximately twice the DSP

resources as on a mono channel.