User Manual

CONFIGURING HOST AUDIO SOFTWARE
45
Figure 7-7: Enabling the MOTU Audio ASIO driver in SONAR.
4 Next, in the Audio preferences section, choose
Devices.
5 Check the Track16 inputs and outputs that you
wish to use and uncheck the ones you don’t.
Using the MOTU WDM driver
1 Go to SONAR’s Preferences.
2 In the Audio preferences section, choose
Playback and Recording.
3 Choose WDM/KS as the Driver Mode, as shown
below.
Figure 7-8: Enabling the MOTU WDM driver in SONAR.
4 Next, in the Audio preferences section, choose
Devices.
5 Check the Track16 inputs and outputs that you
wish to use and uncheck the ones you don’t, as
shown in Figure 7-7 on page 45.
Other audio settings in SONAR
There are a few other settings in SONAR that
impact Track16 operation:
1 In the Audio preferences section, choose Driver
Settings.
2 Choose an Track16 input and output for
recording and playback timing as shown below in
Figure 7-9. It doesn’t matter which input or output
you choose.