User Manual

CHAPTER
7
Quick Reference: Track16 Operation
These 7-segment level meters
have a range from -42 dB to
-1 dB. The top red LED illumi-
nates when the signal reaches
1 dB below full scale — for
even just one sample.
Push the METERS button below
to toggle between the white
labels and blue labels.
Level meters for
the two mic inputs
or the eighth-inch
stereo mini jack on
the front.
Level meters for
the two guitar
inputs or the
phone jacks
on the front.
Level meters
for the line
inputs or the
line outputs.
Dedicated level meters
for the main outs.
To toggle the -20dB pad (P) for a
mic input, push the MIC 1 or MIC 2
button and then push the knob.
To toggle 48V phantom power
(V), push and hold the knob.
To control the trim level for an
input, press its button to select it
(the button turns green) and then
use the knob to adjust input level.
Push the METERS button to
toggle the meters between the
channels labeled in white and
those labeled in blue.
To control the volume for an
output, press its button to select
it (the button turns green) and
then use the knob to adjust level.
To control an input’s CueMix
bus volume (input fader), hold
the desired output bus (MAIN,
PHONES, or LINE OUT) while
pressing the desired input here
so that both buttons turn
green. Then use the knob to
adjust the CueMix input level.
Push to mute/unmute.
This multi-function knob
controls the volume, trim, or bus
level of the currently selected
input or output channel (or
pair). Use the buttons below to
select the desired input or
output. When an output is
selected, push the knob to mute
or unmute it. You can do the
same when controlling an
input’s CueMix bus volume (as
explained below).