Instruction manual

INSTALLING THE MOTU USB SOFTWARE
11
Figure-8: Connecting the device to the FastLane interface.
3
Double-click the device to make settings, such
as input and output channels, that further describe
the device.
Figure-9: Device settings.
4
Repeat the above steps for each MIDI device
connected to the interface.
5
When you are finished, quit Audio MIDI
Setup.
Yo u r c o n fi g u r at i o n is automatically saved as the
default configuration, and it is shared with all
CoreMIDI-compatible software. You can use the
Configuration menu to create, duplicate or delete
alternative configurations.
FastLane-USB manual/Mac Page 11 Friday, April 15, 2005 12:28 PM