Instruction manual

INSTALLING FASTLANE-USB
5
Installing FastLane-USB
CONNECTING A USB MACINTOSH
Using the USB cable included with FastLane-USB
(or any standard USB cable), put the Type A plug
into a Type A USB jack on the computer, the USB
computer keyboard, or any other USB device
connected to the computer that has an available
Typ e A USB jack. The USB cable allows the Mac to
communicate with all MIDI devices connected to
FastLane.
If you have several FastLane-USB (or other
MOTU) interfaces, see “Connecting multiple USB
interfaces” on page 8.
Figure-1: You can plug the Type A connector into a Type A jack
directly on the computer itself, a USB keyboard connected to the
computer, or any other USB device already connected to the
computer that has an available Type A USB jack.
Figure-2: The square Type B plug goes into FastLane.
You c an use any available
Type A jack.
The flat, “Type A”
USB plug connects to
the computer.
The square, “Type B”
USB plug connects to
the MIDI interface.
FastLane-USB manual/Mac Page 5 Friday, April 15, 2005 12:28 PM