User guide

CLOCKWORKS
29
Familiarity with your computer
In explaining how to use ClockWorks, this chapter
assumes that you are already familiar with the standard
computer interface conventions, such as how to select
options using menus, check boxes, radio buttons, etc. and
how to type and edit text, and so forth.
Opening ClockWorks
When you first launch ClockWorks, the default view for
ClockWorks is the MIDI Routing window (Figure 5-1),
which displays the current MIDI processing configu-
ration.
If your MOTU interface doesn’t appear
If your MOTU interface doesn’t appear in the Window
menu, check the following things:
■ Your MOTU interface is turned off. Power it up and
choose
Refresh from the ClockWorks File menu.
■ A MOTU interface is not connected to the computer, or
it is connected improperly. Make sure your cable
connection(s) to the interface match Figure 2-1 and
Figure 2-2 on page 9.
■ Mac users: open Audio MIDI Setup and make sure that
the interface is present in your current studio setup. If not,
scan for it as explained in “Launching Audio MIDI Setup”
on page 17.
■ If you make any adjustments to your hardware, choose
Refresh from the ClockWorks File menu.
THE FILE MENU
Here is a brief explanation of each item in the ClockWorks
File menu.
Devices
Any MOTU MIDI interfaces that have successfully
established communication with ClockWorks appear at
the top of the File menu. Choose a device to open its
window, or bring its window to the front.
Load Configuration
The Load Configuration menu item opens a previously
saved ClockWorks document and restores all of the
MOTU interface settings saved in the document.
!USB Interfaces Manual Book Page 29 Tuesday, August 16, 2011 11:21 AM