Instruction manual

INSTALLING FASTLANE-USB
7
CONNECTING ADDITIONAL GEAR WITH MIDI
THRUS
If you use up both MIDI OUTs on the FastLane,
and you still have more gear to connect, run a
MIDI cable from the MIDI THRU of a device
already connected to the interface to the MIDI IN
on the additional device as shown below in
Figure-4. The two devices then share the same
MIDI OUT port on FastLane. This means that they
share the same set of 16 MIDI channels, so try to
do this with devices that receive on only one MIDI
channel (such as effects modules) so their receive
channels don’t conflict with one another.
Figure-4: Connecting additional devices with MIDI THRU ports.
Fas tLane
MIDI IN
MIDI cable
MIDI Device
MIDI
THRU
Additional device
MIDI IN
MIDI
OUT
MIDI cable
FastLane-USB manual/Win Page 7 Friday, April 15, 2005 12:32 PM