Instruction manual

INSTALLING THE MOTU USB WINDOWS DRIVER
9
Installing the MOTU USB Windows Driver
To i nst a l l t h e MOTU USB MIDI driver:
1
If the FastLane-USB is currently connected to
the computer, unplug it.
2
Tur n on you r computer.
3
If you have previously installed MOTU USB
MIDI drivers, use the Windows Add/Remove
Programs control panel to remove the old MOTU
USB MIDI drivers before proceeding.
4
If the Windows Add Hardware Wizard appears
during startup, do not proceed and exit from the
Wizard.
Instead of installing the FastLane-USB drivers
manually via the Wizard, you will run the
FastLane-USB software installer.
5
Insert the MOTU USB software installer CD in
the computer’s CD drive (if you haven’t already).
6
If the MOTU USB software installer program
does not automatically begin running, double-
click SETUP.EXE on the installer CD to launch it.
7
Follow the directions the installer gives you.
FastLane-USB manual/Win Page 9 Friday, April 15, 2005 12:32 PM