Moulf43 27/07/07 8:40 Page 2
Moulf43 27/07/07 8:40 Page 3
Moulf43 27/07/07 8:40 Page 4
Moulf43 27/07/07 8:40 Page 5
Moulf43 27/07/07 8:40 Page 6
Moulf43 27/07/07 8:40 Page 31 Moulinex approved accessory Service centre Stainless steel chip cutter disc (disc E) Stainless steel grater disc (disc G) Stainless steel parmesan shaving / scraping disc (disc B/G) Stainless steel thick slicing / grating disc (disc C/H) Stainless steel thin slicing / grating disc (disc A/D) Mini-chopper Grinder Blender Blender with tap Transparent bowl assembly Metal blade Plastic kneader Whisk Emulsifier Citrus press Maxipress (only for electronic version) Centrifugal jui
Moulf43 27/07/07 8:40 Page 7
Moulf43 27/07/07 8:40 Page 8
Moulf43 27/07/07 8:40 Page 21 Thank you for choosing a product from the MOULINEX range, exclusively designed for the preparation of foodstuffs. i2. bowl j. Grinder j1. lid j2. bowl k. blender with or without tap k1. measuring cap k2. lid k3. jug k4. removable handle k4-1. knob for unclipping the handle k5. seal pour tap k6. tap k7. stopper l. “Maxipress” l1. rotor blade l2-1. disc for purée l2-2. disc for coulis m. Centrifugal juice extractor with pouring spout or filter basket m1. food pusher m2.
Moulf43 27/07/07 8:40 Page 22 assembly (m9+m10) are damaged. - For your safety, only use MOULINEX accessories and spare parts adapted to your appliance. - Switch off the appliance and unplug it before changing the accessories or contact with the parts which move during operation. - Only use one accessory at a time. - Always use the food pushers to guide the foodstuffs in the feed tubes, never use your fingers, or a fork, spoon, knife or other objects.
Moulf43 27/07/07 8:40 Page 23 Starting your appliance the clips of the bowl. - Slide the handle upwards until it clicks into place. - To remove the handle, press the release knob (b4-1) or (k4-1) and slide it downwards. (Note: the lid of the blender must be removed to allow the handle (k4) to be taken off.
Moulf43 27/07/07 8:40 Page 24 Tips Blending - You can blend up to 1 litre of stew, soup, or purée in 20 s. Chopping - In 15 to 30 s, you can chop up to 600 g of foodstuffs: • hard foodstuffs: cheese, dry fruits, certain vegetables (carrots, celery...). • tender foodstuffs: certain vegetables (onions, spinach...). • raw or cooked meats (bones and nerves removed and cut into cubes). • raw or cooked fish...
Moulf43 27/07/07 8:40 Page 25 - Place the spindle (c) onto the bowl drive (b3-1). - Slide the emulsifier onto the spindle. Then: - Place the ingredients into the bowl. - Fit the lid (b2) or (d4) on the bowl. - Close the upper drive cover (a1). You should hear it click shut. (h1). You can make up to 1 litre of juice without emptying the bowl. 6 SMOOTHIES / BLENDING / FINE BLENDING ACCESSORY USED - blender (k). FITTING THE ACCESSORY Press the release button (a4) to open the upper drive cover (a1).
Moulf43 27/07/07 8:40 Page 26 Tips You can add ingredients via the hole of the cap (k1) during the preparation. Always use your blender (k) with its cover (k2) fitted. - Do not fill the blender with a boiling liquid. - Do not use the blender with dry foodstuffs (walnuts, almonds, peanuts…). You can: - prepare up to 1.5 litres of finely blended stews or soups, creams, purées, milk-shakes, cocktails. - blend any liquid preparations (pancakes, doughnuts, clafoutis). - crush ice at max.
Moulf43 27/07/07 8:40 Page 27 fruits and vegetables without having to clean the centrifugal juice extractor every time, the flavours will not be mixed. - Drink the juices immediately after preparation or add lemon juice to prevent them from browning for a few hours. 9 PUREEING/ PRESSING / MASHING (depending on model) ACCESSORIES USED - Bowl assembly (b), spindle (c),et "Maxipress" (l) FITTING THE ACCESSORY Press the release button (a4) to open the upper drive cover (a1).
Moulf43 27/07/07 8:40 Page 28 11 MINCING HEAD(depending on model) bones, nerves and cartilages. - Cut the meat into pieces (approximately 2 x 2 cm) and place them on the tray (o2). - Place a bowl underneath the mincer head. ACCESSORIES USED - Geared reducer assembly (n) and mincer head (o). BEFORE FIRST USE - Wash the mincer head in hot soapy water and dry it carefully immediately.
Moulf43 27/07/07 8:40 Page 29 make any kinds of sausages. 13 BISCUIT NOZZLE (depending on model) This accessory which fits onto the metal mincer head allows you to make small biscuits. ACCESSORIES USED - Sausage funnel (p), geared reducer assembly (n) and mincer head (o). ACCESSORIES USED - Biscuit nozzle (q), geared reducer assembly (n) and mincer head (o) ASSEMBLY - Fit the screws (o3) to the body (o1) of the mincer head metal. - Place the funnel (p) then the nut (o6) and tighten fully.
Moulf43 27/07/07 8:40 Page 30 Tips The speeds used are those of paragraph 11. kneader (e2) and the spindle (c) in it. - a cord storage recess inside the motor unit: Store and adjust the length of the power cord to suit your requirements by pushing or pulling the cord. Cleaning - Unplug the appliance. - To make cleaning easier, rinse the accessories quickly after use.
27/07/07 8:40 Ref.
