Operation Manual

ManualsBrandsMoulinex ManualsHouseholdPrincipio

Please read these instructions carefully and keep for future

reference.

Description

A. Spray nozzle (depending on the model)

B. Water tank filling inlet with cover

C. Steam control button (with self-clean function )

D. Spray button (depending on the model)

E. Shot of steam button (depending on the model)

F. Electric power cord support

G. Thermostat indicator light

H. Thermostat control dial

I. Water tank maximum fill line.

J. Soleplate

Warning ! remove the soleplate protector before

heating up the iron

Warning ! before using your iron with the steam

function for

the first time, we recommend that you

operate it in a horizontal

position for a few moments,

away from your linen, ie press several times on the

shot of steam button.

What water to use ?

Your appliance has been designed to function with

untreated tap water. However, it is necessary to operate the

Self-Clean function regularly in order to eliminate hard water

deposits. If your water is very hard (check with your water

authority), it is possible to mix untreated tap water with

store-bought

demineralised

water in the following

proportions : 50% untreated tap water, 50% demineralised

water.

Types of water not to use ?

Heat concentrates the elements contained in water during

evaporation. Types of water listed below contain organic waste

or mineral elements that can cause spitting, brown staining, or

premature wear of the appliance : water from clothes dryers,

scented or softened water, water from refrigerators, batteries,

air conditioners, pure distilled water, pure demineralised water

or rain water, boiled water, filtered or bottled mineral water. All

of these should not be used.

1. Safety instructions

- Read the instructions for use carefully before using your

appliance for the first time and keep them : any use which

does not conform to the instructions for use will absolve

Moulinex from any liability.

- Do not leave the appliance within reach of children

unsupervised. The use of this appliance by children or by

disabled persons must be supervised at all times.

- Check that the specifications of your appliance are compatible

with those of your electrical system.

- This appliance must be connected to an earthed socket.

Any connection error will invalidate the guarantee.

- This apliance is intended solely for domestic and indoor use.

- The appliance must not be used if it has fallen, if there is any

obvious damage, if there are any leaks or functional anomalies.

Never dismantle your appliance: to avoid any danger, take it

for inspection to an approved service centre

- Do not use the appliance if it is not working properly or if it

has been damaged. Any intervention apart from cleaning and

normal maintenance by the customer must be carried out by

an approved Moulinex service centre (see list in the service

booklet).

- Do not place the appliance, the power cord or the plug in

water or in any other liquid.

- Do not allow the power cord to hang down within reach of

children.

- Place the appliance on a flat, stable, heat-resistant surface

away from water splashes.

- When placing the iron on its stand, ensure that the surface

on which the stand is placed is stable.

- The power cord must never be close to or in contact with

the hot parts of your appliance, close to a source of heat, or

resting on a sharp edge.

- If the power cord or the plug are damaged do not use the

appliance. To avoid any risk these must be replaced by an

approved Moulinex service centre (see list in the service

booklet).

- For your own safety, use only the accessories and spare

parts from Moulinex which are suitable for your appliance.

- The iron is fitted with a thermal safety device which cuts off

the power if anything goes wrong.

- Never leave the iron unsupervised when it is plugged in.

- Unplug the iron :

. before filling the tank

. when you have finished ironing and for any maintenance.

- Do not unplug the appliance by pulling on the power cord.

- Allow the iron to cool down before putting it away.

If you have any problems or queries please call our Customer

Relations Team first for expert help and advice :

HELPLINE

0845 602 1454 - UK

(01) 47 51947 - IRELAND

or visit our website : www.moulinex.co.uk

Summary of content (3 pages)

PAGE 1
Please read these instructions carefully and keep for future reference. - Do not use the appliance if it is not working properly or if it has been damaged. Any intervention apart from cleaning and normal maintenance by the customer must be carried out by an approved Moulinex service centre (see list in the service booklet). - Do not place the appliance, the power cord or the plug in water or in any other liquid. - Do not allow the power cord to hang down within reach of children.
PAGE 2
• OBTAINING MORE STEAM FOR REMOVING CREASES ( ) (depending on the model) - Press the Shot of steam button (8) - Wait a few seconds between each shot before pressing the button again. 2. Steam ironing • FILLING THE WATER TANK : - Unplug your iron before filling it. - Set the steam control on DRY (1) ( ) - Fill the beaker - Open the water tank cover completely (2), set the iron on a flat, stable surface (not when the iron is hot) shown in the diagram (3) and fill the tank.
PAGE 3
• CLEANING THE SOLEPLATE - Do not scratch or scrape the soleplate. Do not use strong or abrasive detergents for cleaning. - Clean the soleplate (cold iron) on a piece of thick, clean, damp cotton before putting away the iron. 5. Storing your iron - Unplug it and wait until the soleplate has cooled down. - Empty the water tank and set the steam control on DRY. - Store the iron on its heel. 6.