Specifications

ManualsBrandsMoultrie ManualsDigital CameraPlotStalker

1109012 / MCG-12590

Instructions for D-333

Digital Game Camera

THANK YOU for your purchase of the D-333 Digital Game Camera. Please read this

booklet before using the unit. If you should have any questions about this product or

any other Moultrie product, please contact us using the information on the back of

this booklet. Please register your camera at www.moultriefeeders.com/warranty

to activate your warranty.

CAMERA OVERVIEW

Page 1

D-333 Digital Game Camera

FRONT VIEW

BOTTOM VIEW

Status Indicator

Light Sensor

LCD Display

LED Flash

IRAIM / OFF / ON

OK/Select Button

Menu Button

Navigation Buttons

External Power Port

Push Button Release for battery compartment

USB Port

SD Card Slot

Camera Lens

Motion Sensor

Our Service Department will gladly answer any questions you

have. Call 800-653-3334, Monday - Friday, 8:00 AM to 5:00 PM CST.

www.moultriefeeders.com

Important Battery lnformation

- Only use alkaline batteries. We recommend the use of Duracell or Energizer batteries.

- Do not mix old and new batteries. Always replace ALL the batteries at the same time.

- When the camera is not in use, please remove the batteries.

Moultrie Limited Warranty

This product has been thoroughly tested and inspected before shipment. It is guaranteed from

defects in material and workmanship from the date of purchase for 1 year. Under this limited

guarantee we agree to replace or repair free of charge any part or parts which have been found to

be defective in original material or workmanship. Should you require in-warranty service, call our

Customer Service Department. If your problem cannot be addressed over the telephone, we may

need you to send us your defective product plus proof of purchase.

FCC Statements

Moultrie Products, LLC

MCG-12590

Note: changes and modiﬁcations not expressly approved by the party responsible could void the user’s authority to operate this device.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS

EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT.

NOTE: This device complies with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable

protection against harmful interference in a residential installation. This device generates,

uses, and can radiate radio frequency energy

and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no

guarantee that interference

will not occur in a particular installation. If this device does cause harmful interference to radio or television reception,

which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- lncrease the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Summary of content (8 pages)

PAGE 1
Instructions for D-333 Digital Game Camera Important Battery lnformation - Only use alkaline batteries. We recommend the use of Duracell or Energizer batteries. - Do not mix old and new batteries. Always replace ALL the batteries at the same time. - When the camera is not in use, please remove the batteries. Moultrie Limited Warranty This product has been thoroughly tested and inspected before shipment. It is guaranteed from defects in material and workmanship from the date of purchase for 1 year.
PAGE 2
I CAMERA OVERVIEW (cont.) IRAIM / ON / OFF X MOULTRIE ACCESSORIES Using a Tree Mount IR Aim - When IR Aim is ON and the PIR sensor detects motion, the red LED on the front of the camera will come on for 2 seconds and then shut off. MENU BUTTON The Menu Button selects Camera Setup or Main Screen. When camera mode is selected, the LEFT and RIGHT buttons navigate through the menu options.
PAGE 3
IX VIEWING TIME LAPSE (cont.) II QUICK START INSTRUCTIONS To turn photo sequences into Time Lapse Video PLOTSTALKER ACTIVITY SEARCH BReasons you may want to create a video with your images: Use the steps below as a guide to quickly set up your camera so it will function using the factory default settings. • Makes it easier to e-mail your image sequences. ACTIVITY SEARCH • Allows you to select the scan rangethrough of images you photos want included, to eliminate uninteresting images.
PAGE 4
IV CAPTURE MODES IX VIEWING TIME LAPSE 1 MOTION DETECT This easy-to-use software allows you to advance through the series of images a number of different ways: Still photos or videos are taken when an animal is detected. The number of photos taken per detection event and whether still photos or videos are taken is configurable in settings. Photos and videos are stored in the DCIM/100MFCAM folder on the SD card. BEGIN/END Goes to the first or last photo in the Plot File.
PAGE 5
VIII V TIME LAPSE SETUP AND PROGRAMMING (cont) Setting General Features When you choose General the LCD Display will automatically start showing the different features within General. Using the navigation process, set the features you desire. INTRODUCTION In time-lapse photography a series of still photos are taken at regular time intervals.
PAGE 6
VII PHOTO QUALITY HIGH(4mP) Setting Photo Quality Press the OK button. Use the Up/Down buttons to choose between 4 image quality settings. 1. Enhanced: 3048 x 2286 2. High: 2304 x 1728 3. Medium: 1600 x 1200 4. Low: 640 x 480 Press the OK button. Press the Right button. VIDEO LENGTH 10 SECONDS Video Length Press the OK button. Use the Up/Down buttons to choose between 5 video length settings (5, 10, 30, 60 or 90 seconds).
PAGE 7
VI CAMERA SPECIFICATIONS RESET TO DEFAULT SETUP YES Memory & Storage Your camera supports external SD memory cards ONLY and will accept up to a 32GB card. Using large memory cards can slow the camera response. The camera cannot capture any photo or video without external memory. Please insert an SD memory card to operate camera. Estimates are based on the most common types of memory cards that can be purchased at electronic stores, ofﬁce supply stores, or online.
PAGE 8
i m p r i n t i n F o? YES Setting Time Lapse Features When you choose Time Lapse the LCD Display will automatically start showing the different features within Time Lapse. Using the navigation process, set the features to your preference. Imprint Info? Use the Up/Down buttons to choose between: YES - Camera Name, Time, etc, information will be imprinted at the bottom of the image/video as an infromation bar) Note: Remember to input the camera name in the setup and set the clock accordingly.