Use and Care Manual

Table Of Contents

MI-7929

FOR LED/LCD/TFT AND MONITOR DESK

1.Unpackage your Updesk from the box and place it on your existing desk.

2.Use the lever to raise the desk. Hold both sides of the desk,squeeze the lever,

and give a gentle lift. After the ﬁrst few inches it will raise easily by itself.

3.To lower the desk, hold both sides, squeeze the lever, and apply gentle force

downward. when lowering, newer Updesks are a little stiff for the ﬁrst little

while and require extra force to lower. This will get easier as you “break in”

your desk.

INSTRUCTIONMANUAL

PAGE 1
INSTRUCTION MANUAL MI-7929 FOR LED/LCD/TFT AND MONITOR DESK 1.Unpackage your Updesk from the box and place it on your existing desk. 2.Use the lever to raise the desk. Hold both sides of the desk,squeeze the lever, and give a gentle lift. After the ﬁrst few inches it will raise easily by itself. 3.To lower the desk, hold both sides, squeeze the lever, and apply gentle force downward. when lowering, newer Updesks are a little stiff for the ﬁrst little while and require extra force to lower.