Operating Instructions

Setting the Weather Channel
1. In weather mode, press the button until the weather
channel number flashes.
2. Press or to select the appropriate channel for your area.
3. Press the PTT button to set the channel and exit the menu.
Setting the Weather Alert
You radio can be set to respond to NOAA Weather Radio
emergency messages.
1. In weather mode, press the button twice. The icon will
be displayed.
2. Press or to turn weather alert on or off.
3. Press the PTT button or to exit the weather alert menu.
4. Repeat the step to disable the weather alert.
2. When activity is detected, the radio will stop scanning and
receive the transmission. At the end of transmission, press
the PTT button within five seconds to respond. Otherwise the
radio will resume scanning.
3. If the PTT button is pressed while the device is scanning, the
transmission will be sent on the main selected channel.
4. Press the button to exit scan mode.
Note: If the device stops on an unintended/undesired
transmission, press or to resume scan OR temporarily
remove that channel from the scan list by pressing and holding
or for three seconds.
To restore removed channels to the scan list, press to exit
and re-enter scan mode.
Weather
WEATHER CHANNELS & FREQUENCIES
Weather
Channel
(MHz)
Frequency
Weather
Channel
Frequency
(MHz)
WX1 162.550 WX7 162.525
WX2 162.400 WX8 161.650
WX3 162.475 WX9 161.775
WX4 162.425 WX10 161.750
WX5 162.450 WX11 162.000
WX6 162.500
9