Operating Instructions

Insert 3 AA NiMH

batteries.

Close the battery

cover.

Battery Life

3. Install the included AA NiMH batteries according to the

orientation shown in the battery compartment.

4. Close the battery compartment cover and replace the screws,

turning clockwise until snug.

A fully charged battery is indicated by three solid bars .

When the battery is low, the display will show one blinking bar

and the radio will emit a low battery warning beep after each

transmission.

Note:

• Remove the batteries from the radio prior to storage. Batteries left

in the radio during storage may corrode over time and may cause

permanent damage to your radio.

• Do not mix old and new or alkaline and NiMH batteries.

• Charge the supplied NiMH batteries once every three

months when not in use.