User's Manual

LEDblinkingslowly:

recordingcommandisOFF

LEDfullgreen:

recordingcommandisON

Start / Stop Recording

1. If you are using a supported camera

Youcan start/stop recording by pressing BRIEFLY thewatch button . DO NOT

press the REC button directly on the camera.

Whenthecameraisrecording,thegreenLEDofthewatchturnsON.Thewatch

willblinkslowlywhenyoustoprecording.Ifthezoomisbusy,somedelaymight

occurwhenyoustart/stoprecording.Inthiscase,thegreenLEDofthewatch

willblinkquicklyuntilyourorderistakenintoaccount.

2. If you are using a non supported camera

Ifyouareusingacameramodelwhichisnotsupportedbytherobot,justpress

«record»directlyonyourcamera.