User's Manual

25
2. Pair a device (robot, watch or beacon) to the master
The master robot must be running in pairing mode to pair a new device (see the previous paragraph).
Topairanewdevice(slaverobot,watchorbeacon),startthedevicecloserthan1meter(3ft)fromthe
master robot.Thegreenlightofthedeviceblinks4timesintermittentlyoncethepairingiscompleted.
Youmustrestartallthedevicesbeforestartingthetracking.
Thepairingissavedforfutureuse.
3. How to recognize a slave robot and a master robot ?
Duringignition(beforethestartofthetracking),thegreenandred lights of a slaverobotblinkalternately.
Only the greenlightblinksonamasterrobot.
Youmustpairatleastonewatchand3beaconstothemasterbeforestartingthetracking.
NOTICE