User's Manual

2. Multi robot tracking

All devices must be paired together to be able to run into the MULTI-USER mode (see the «Pairing procedure:

pair your devices (robots, watches and beacons)», page 24).

Eachrobotmustpointatthebeaconn°1beforeturningONtherstwatchandstartingthetracking.

TurnONeachbeaconbypressingthe

buttonuntilthegreenlightturnsON.

PlacethePIXIOrobotandthe3beaconsaroundtheareayouwanttolm,in such a way that beacon n°2

is on the left of the beacon n°1, as seen from the master robot. Thebeaconn°3canbeplacedontheleft

orontherightofotherbeacons.Thedistancebetweenthebeacons,andthedistancebetweentherobot

andthebeacons,mustbesmallerthan330ft(100m).

Slave

robot

Beaconn°1

Beaconn°2

Beaconn°3

Seen from the master

robot, the beacon

n°2 must be on

the left side of the

beacon n°1.

Master

robot

The distance between each

device must be smaller than

330ft(100m)