User's Manual

TurnONyourcameras.

Check that all watches are OFF.PowerONPIXIOrobotsbypressingthe

buttonfor2seconds.

By rotating the tripod, or with the  robot   buttons and , place the beacon n°1 at the center of

each camera screen.Whatisimportantistheright/leftpositionofthebeacon.UsethemanualZOOMon

thecameratoimprovetheprecision.It’sOKwithaprecisionofabout50cm(20inches).

YourPIXIOrobotsareready!

RemainintheareaandswitchONthewatchbypressing

about2or3seconds.Thesysteminitializes

duringabout10to30seconds.WhenthewatchLEDisblinkingregularly,theinitialisationisnishedandthe

robotistrackingthewatch.