User's Manual

30
Installing a new firmware version on your PIXIO
Firmware v2.9 is already installed on your PIXIO. To take advantage of
thelatestimprovements,installanynewrmwareversionavailablefrom:
https://shop.movensee.com/ccc
Werecommendtoupgradealldevices(therobot,thewatchandthe3
beacons)atthesametime.Makesurethatalldevicesarefullycharged
beforestartingtheprocedure.
1. Download the last firmware version
Downloadthelatestrmwareversionathttps://shop.movensee.com/ccc
Save the rmware on a micro-SD card formatted with the FAT32, FAT16 or FAT12
format (usually, micro-SD cards with a capacity lower than 32Gb are formatted
with a correct format).Thelemustbesavedintherootdirectoryofthe
memorycard,notinasub-directory.Thisleismeanttobeopeneddirectly
onandbyPIXIO(donottrytoopenitfromyourcomputer).
Check that the name of the le is update.mnp without any ...(1) or ...(2) at the end of
the name.
Insertthemicro-SDcardintherobotslotontherobotside.
Need some help to upgrade your PIXIO ?
Have a look at the tutorial video:
https://youtu.be/CxnVju8qysw
The micro SD
card goes into
the robot slot